Meridian Drywall Repair Pros
Drywall Installation & Replacement in Meridian, ID
Full drywall installation and replacement in Meridian, ID for remodels and major damage, with texture matching and free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Meridian and nearby communities.
When a room needs more than a patch, this is the job. Meridian Drywall Repair Pros hangs, tapes, and finishes full drywall sections so the new wall reads exactly like the rest of the house. This service covers whole-wall replacement after remodels, water or impact damage too extensive for a patch, and rooms where framing changes or new construction leave bare studs waiting for board.
Meridian's building boom means a lot of this work follows kitchen and bathroom remodels or additions tied into existing homes, and matching thickness and texture to the surrounding walls is part of the job, not an afterthought.
What's included
What's included with Drywall Installation & Replacement
Optional Customer prep
- Typically included — Removal and disposal of damaged or outdated drywall - Hanging new panels sized to match existing wall thickness - Taping, mudding, sanding through multiple coats -
- Texture application to blend with adjoining walls — Primer coat so the surface is paint-ready
- Full room repaint after installation
- Upgrade to moisture-resistant board in bathrooms or laundry areas
- Insulation add or replacement behind new drywall
- Clearing furniture and wall decor from the work area
- Confirming electrical or plumbing rough-in is complete before board goes up
Want a clearer scope?
Get a Free EstimateHow it works
How our Drywall Installation & Replacement process works
Step 1Site walkthrough
measure the space and confirm panel thickness needed
Step 2Written estimate
cost broken down by material and labor before work starts
Step 3Demolition
remove old or damaged drywall down to the studs
Step 4Hanging panels
fasten new board with proper screw spacing and pattern
Step 5Taping and mudding
three-coat process over seams and screw heads
Step 6Sanding
smooth every coat before the next application
Step 7Texture matching
blend knockdown, orange peel, or smooth finish to match the room
Step 8Priming and walkthrough
prime coat applied, final inspection with the homeowner
Cost
What does a Drywall Installation & Replacement cost in Meridian?
Full installs price differently than a patch job since they're measured by square footage or per room rather than per hole. These ranges are a starting point. An on-site look gives you the real number. Call for a free estimate and we'll walk the space before quoting a number.
| Project type | Typical range | What’s included |
|---|---|---|
| Small section replacement | $400–$900 | one wall or a closet-size area, hang through paint-ready finish |
| Single room installation | $1,200–$3,000 | full walls and ceiling in a standard bedroom or bathroom |
| Multi-room or remodel-scale install | $3,500–$8,000+ | larger square footage tied to a remodel or addition |
| Moisture-resistant upgrade | $0.50–$1.00 | add per sq ft — swapped in for bathrooms, laundry rooms, or areas near plumbing |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods for Drywall Installation & Replacement
We match panel type and thickness to what's already on the wall, then finish with methods built for Idaho's dry climate where seams can show stress sooner than in wetter regions.
1/2-inch standard drywall panels
the common thickness for most Meridian interior walls, used to match existing construction
5/8-inch fire-rated board
used where code calls for it, typically garage-to-house shared walls
Moisture-resistant (green board)
installed in bathrooms and laundry areas to resist the humidity swings common with plumbing fixtures
Paper-faced corner bead
gives a straighter, more durable edge on outside corners than plastic bead alone
Setting-type joint compound
used for the first coat on new installs since it resists cracking better than all-purpose mud during Idaho's dry-air cure
Knockdown and orange peel texture systems
sprayed to match the existing wall finish so the new section disappears into the room
Questions on materials?
Get a Free EstimateTimeline
How long does a Drywall Installation & Replacement take?
- 01
Stage 1
A full install runs on a longer schedule than a patch because of hang time, multiple mud coats, and dry time between each pass.
- 02
Stage 2
2 days**Demolition and hang** — 1 day **Taping and first coat** — 1 day **Second and third mud coats** — **Sanding and texture** — 1 day **Prime and final walkthrough** — 1 day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Drywall Installation & Replacement
Permit rules can vary by scope and jurisdiction. Check with Meridian or Ada County building department before larger installs.
| Typically needs a permit | Often no permit |
|---|---|
| Full-room or whole-house drywall replacement tied to a remodel | Replacing drywall in a single small section without touching wiring |
| Installation involving structural framing changes | Cosmetic re-hang after minor water or impact damage |
| Work near electrical panels or in fire-rated wall assemblies (garage separation walls) | Texture and finish work on existing |
| — | unmodified board |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Drywall Installation & Replacement
| DIY | Hire a pro |
|---|---|
| Hanging a single small patch panel in a closet or low-visibility area | Full room or multi-room installs where seams need to disappear |
| Basic taping practice on a garage wall where texture matching isn't critical | Matching texture across an addition or remodel connecting to existing rooms |
| Simple projects where mismatched thickness or texture won't be noticed | Any job involving fire-rated assemblies or electrical proximity |
| — | Projects where getting panel thickness wrong means redoing trim and corners later |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Drywall Installation & Replacement
Call if a remodel has left bare studs waiting for board, if water or impact damage covers more than a couple square feet, or if an addition needs drywall tied smoothly into an existing room. If the scope feels bigger than a patch kit can handle, it's an install job. Get a free estimate before starting demo so material and labor costs are settled up front.
Seeing warning signs?
Get a Free EstimateBefore & after
Before and after Drywall Installation & Replacement
Before 
After
Next step
Bare studs after a remodel → fully hung, taped, and texture-matched wall ready for paint
FAQs
Drywall Installation & Replacement FAQs
How much does drywall installation cost in Meridian?
Small sections run $400–$900, a single room typically falls between $1,200 and $3,000, and multi-room remodel-scale work can run $3,500 and up depending on square footage and finish level.
Do I need a permit for drywall installation or replacement?
Small section replacements usually don't need one. Full-room installs tied to a remodel, structural changes, or work near electrical panels often do. Check with Meridian or Ada County before starting.
How long does a full room drywall install take?
Plan on about a week from demolition through final texture and priming, since multiple mud coats each need dry time before sanding and the next pass.
Can you match texture between a new install and my existing walls?
Yes. We test the texture pattern (knockdown, orange peel, or smooth) on a sample area first and check it under the room's actual lighting before finishing the full wall.
Is drywall installation a DIY-friendly project?
Not usually beyond a small closet panel. Getting panel thickness, seam placement, and texture consistent across a full room takes practice most homeowners don't have, and mistakes are expensive to fix after paint goes on.
What thickness drywall do you use?
Standard interior walls use 1/2-inch board. Garage-to-house shared walls or other fire-rated assemblies typically require 5/8-inch board per code.
Should I upgrade to moisture-resistant board during a remodel?
It's worth considering for bathrooms, laundry rooms, or any wall near plumbing fixtures, since it holds up better against humidity swings than standard board. Call (986) 386-4469 for a free estimate before your remodel starts.
More services
Other Drywall Repair services
Drywall Repair
Drywall repair in Meridian, ID for holes, cracks, and nail pops with texture-matched finishing. Free estimates, no guesswork.
Drywall Patching
Drywall patching in Meridian, ID for small to mid-size holes with texture blending that disappears. Free estimates available.
Sheetrock Repair
Sheetrock repair in Meridian, ID matching panel thickness and texture for old and new homes. Free estimates, honest pricing.
Ask about Drywall Installation & Replacement
Tell us about the project and how to reach you.